Parameters of Dry Type Fish Feed Extruder
|
Model
|
Capacity (t/h)
|
Main Power(kw)
|
Feeder Power(kw)
|
Screw Diameter(mm)
|
Cutter Power(kw)
|
|
DGP50
|
0.06-0.08
|
11
|
0.4
|
φ50
|
0.4
|
|
DGP60
|
0.12-0.15
|
15
|
0.4
|
φ60
|
0.4
|
|
DGP70
|
0.18-0.25
|
18.5
|
0.4
|
φ70
|
0.4
|
|
DGP80
|
0.3-0.35
|
22
|
0.4
|
φ80
|
0.6
|
|
DGP90
|
0.4-0.45
|
37
|
0.4
|
φ90
|
1.5
|
|
DGP120
|
0.5-0.7
|
55
|
0.4
|
φ120
|
2.2
|
|
DGP135
|
0.8-1.0
|
75
|
0.4
|
φ133
|
2.2
|
|
DGP160
|
1.2-1.5
|
90
|
0.75-1.1
|
φ155
|
3.0
|
|
DGP200
|
1.8-2.0
|
132
|
1.5
|
φ195
|
3.0-4.0
|
In recent years, pellet fish feed is widely employed in fish feeding, which brings good economic benefits to fish farmers. However, fish feed is a major expenditure for fish farmers. In order to reduce the cost, making fish feed pellets by themselves is always what farmers are first concerned about. If you would like to make fish pellets by yourself, our dry type of fish feed pellet extruder, the specialist in floating fish feed pellet production, is a wise choice. It can produce high-quality floating fish feeds without steam conditioning of the raw material. The feed pellets can be used to feed aquarium fish, carp, golden fish, tropical fish, shrimp, bullfrogs, mink and sea eel, etc. This dry-type floating fish feed machine is the ideal device for small and medium size feed processing plants and aquafarms.
Spotlights of Dry Type Fish Feed Machine
1. This fish food extruder is widely used for producing floating feed pellets for all kinds of aquatic animals.
2. Advanced technology and humanized design ensure easy operation and reliable performance.
3. High efficiency, low power consumption
4. Screw sleeve of this small fish food extruder adopts enchase alloy steel strip structure, which guarantees long service life.
5. Different molds can be chosen to make pellets with different diameters and shapes.
6. Feed pellets diameter is 0.9-15mm.
7. Dry type fish feed extruder does not need the steam boiler, so the dry-type fish feed pellet machine is cheaper and easier to use and operate compared with wet-type pellet machines.
Materials for Floating Fish Feed Extruder
1. Raw materials can be corn, wheat, soybean, grain, bone powder, etc.
2. Raw materials need to be ground into less than 2mm.
3. Raw material’s moisture content is around 20-25%.
|
|
|
Advantages of Dry Pellet Feed
●Storage: can be kept for two to three months when stored in a covered cool dry place.
●Hygiene: expansion process can eliminate most bacteria. Low moisture content (about 10%) can prevent bacterial growth.
●Nutrition: can be added with animal or plant protein, fish oil or other fats, vitamin complex, and minerals required by specific fish species. It is highly nutritious and can effectively improve the health of fish stock.
●Environmental impacts: using pellet feed of appropriate size and density can lower the loss rate and significantly mitigate the environmental pollution caused by the feed residues.
Correct Way to Feeding
1. Do not feed too quickly or too much. This wastes money and pollutes fish farms.
2. Observe how fish respond to feeding and portion the feed appropriately. Low consumption may be a sign of disease or deteriorating water quality.
3. It is best to give frequent feeds in small quantities.
4. If using dry pellet feed, consider having an automatic feeding machine installed to save manpower.
5. Keeping a farm management record helps fish farmers to control costs and select the right management approach. It helps to detect potential disease outbreaks at an early stage.
