CF500A Diesel Hammer Mill

CF500A Wood Hammer Mill Specifications

Advantages of Diesel Wood Hammer Mill
1. Energy saving and high efficiency.
2. Both for processing biomass materials and grain products, so this hammer mill can be used for making wood pellets and animal feed pellets.
3. The hammer mill may be powered by 2 electrodes motor that is driven by four B-type belts.
4. For processing biomass products, the max material diameter can be up to 50 mm, the final product is just meeting the pelletizing requirement.
5. The screen sizes can be offered as per your request.

Applications of CF500A Wood Hammer Mill
1. This CF500A wood hammer mill is driven by a diesel engine, making it available in areas short of electricity.
2. Equipped with hammers, this wood hammer mill is more suitable to crush soft agricultural crops such as wheat stalks, alfalfa, corn straws, switch grass, peanut soybean shells, and bamboo.

This wood hammer mill can be used in wood pellet production which can be used as animal bedding, heat fuel, and fodder.
▶Wood hammer mills are able to crush both forestry and agricultural material, brittle and fibrous material, such as bamboo, stalk, grass, and shrub. A screen with cutting edges is used to control the wood particle size. If the size is larger than the screen, this material will be sent back to the ground again until it can get through the screen. The size of the ground material depends on the size of the screen and the rotation speed.
▶ The common application of wood hammer mills always falls into several parts: industrial, agricultural, research, and residential applications.
☞ Industrial use of hammer mills can include paper production, grinding grain for biofuel production, and grinding wood scrap into mulch for manufacturing wood pellets as heating fuel.
☞ For agricultural applications, a wood hammer mill can crush wheat stalk, corn straw, tomato stem, and other green leaves into mulch to make fertilizer and fodder. Finely grinder staw granules can be easily fermented once buried in the earth.
☞ Small wood hammer mills are more suitable for residential use because of their portability and low cost. People can use it to make pellets for home heating, animal bedding, and poultry feed with pellet mills. Raw material to be processed can be leaves and logs in your yard, or cotton stalks and corn staw on your farmland. Homemade pellets are cheaper and it’s also a way to clean up waste in the backyard.

Learn about Cyclone Function for A Wood Hammer Mill

Cyclonic separation is a method to remove wood particles from air steam through vortex separation without filters. In wood chips and sawdust collection, rotational effects and gravity are the main ways to separate the mixed air flow. This method can be also used to separate fine droplets of liquid from a gaseous stream.

A high-speed rotating airflow is established within a cylindrical or conical container called a cyclone. Airflow begins at the top of the cyclone and ends at the bottom, moving in a spiral way. Wood particles out from the wood hammer mill are drawn up into airflow starting the separation procedure. Wood chips and sawdust in the rotating steam have much inertia to follow the moving airflow. They will strike the inner wall until falling to the bottom, waiting to be collected.

The main advantage of cyclones is to reduce the dust content in the air to protect your lungs and breathing system. Pneumoconioses and black lung disease are all caused by long-term exposure to dust. Please take health into consideration when purchasing a wood processing machine.